Products

Work in progress! Feel free to check out the files and give feedback.

The 5V Power Supply kit is a handy device that can be used in a multitude of projects. You can use it to wirelessly power your builder base and all connected components. The 5V power supply accepts 7-12V batteries via a 2.1mm barrel jack and regulates the voltage down to 5V. The power supply is connected to the 5V and GND ports on the builder base.

Open Documentation

Work in progress! Feel free to check out the files and give feedback.

The Joystick DIY Kit allows one to control numerous projects with the Quantum Platform. It can be used to control projects like a remote controlled car, or a robotic arm.

The motivation behind creating the Joystick DIY Kit is to offer a project that is simple to build and highly versatile in use. With this Joystick Kit you are able to easily control a wide variety of motorized projects.

Open Documentation

Work in progress! Feel free to check out the files and give feedback.

The mecanum car was prototyped with a breadboard and a PCA9685 as a PWM expander. Now it is hand solderable featuring the TLC5940 and 2 L293D H-Bridges. Four motors are driven by 8 outputs of a TLC5940. The TLC talks to the client via a bunch of data lines.

The car moves forwards and backwards, and turns like a tank by applying power to only one side. In regards to circuitry, the Mecanum car is a bit more complicated than our other projects, however it is a great project to pursue if you would like to learn more about how to properly drive and control motors with our system.

Open Documentation

Take your ideas from the bread board to the real world. The Builder Base adds sensors and control to your Quantum IoT network. Just build the circuit and connect it to any of the 7 GPIO or I2C screw terminals. The Q-Server features a firmware generator that creates pre-written, dynamically created firmware and automatically uploads to the Builder Base.

Novices and experts alike can create smart IoT networks, just add your own imagination. Check out our online videos for project ideas and tutorials. 

Features:

• Integrate many wireless Builder Bases into sophisticated projects like whole home automation

• Learn basic electronics with easy to use software

• Plug and play

• 7 GPIO , I2C and serial interface

• Digital and analog input, digital and PWM output

• Control servos, DC motors, stepper motors, LEDs, smart LEDs, LCD screens and more

• Supports many advanced temperature sensors, I/O expanders and IMUs.

• Powered by USB or battery

• Screw terminals for dependability

Open Q-Client Documentation

Shipping starts October 2020

The Quantum Q-Server provides complete control over your entire IoT Platform. Designed for novices and experts alike, anyone can build a powerful IoT network controlling anything from home automation to robots.

The Q-Server is the heart of the Quantum IoT platform. Building you own IoT based projects has never been easier. Build custom firmware for your Builder Bases, write applications to control all the IoT devices on the network and even control Samsung SmartThings.

Our straightforward development environment allows you to create firmware and applications without coding. Experienced engineers can add even more capability by embedding their own JavaScript code. The platform grows with you as you build more sophisticated projects.

Features:

• Do it all within the Q-Server interface

• Drag-and-Drop programming, no coding required

• Built-in support for dozens of components for your Builder Base Q-Clients, including smart LEDs, motors, servos, various sensors and more

• Discovers Q-Clients automatically

• Control your IoT projects from phones or tablets

• Supports Bluetooth and WiFi

• Runs locally, secure and privately

• Share applications and firmware on the Quantum Marketplace

Open Q-Server Documentation

Work in progress! Feel free to check out the files and give feedback.

This is the Quantum revision of the classic Simon Says game. It is an intermediate project in relation to hardware, but an advanced project in terms of application building.

We intended to reproduce a game that was fun to play and was highly educational to build. In this project we explore how to use an MCP23017 port expander, and build somewhat complex game logic using the Quantum Platform.

Open Documentation

Shipping starts October 2020

The complete IoT platform to start building sophisticated and purposeful projects that will make you feel like a ninja!

The Quantum Starter Bundle gives you the versatile power of multi-location projects to further enhance your skills, easily and affordably. Follow our video tutorials and leverage predefined apps and firmware to gain fast working knowledge of our projects. The bundle includes one Q-Server and two Q-Clients.

Although most current products on the market are inexpensive, they have high barriers of entry requiring programming skills, limited networking capabilities and are often impractical for IoT.

Without any prior programming experience, you can progress from novice to expert, creating your own apps within our graphic based, drag-and-drop development environment.

Open Q-Server Documentation

Open Q-Client Documentation

Shipping starts October 2020

The Quantum Starter Kit includes everything you need to get started fast. Designed to compliment the Quantum Starter Bundle, this handy kit contains 26 carefully curated components to build a wide variety of projects. The kit comes in a sturdy container which measures H2.25"H x 9.25"W x 6.25"D and includes the following;

• I2C LCD Display
• WS2812 RGB LEDs (8 Pcs)
• IR Emitter
• HC-SR501 PIR Sensor
• Stepper Motor + Driver Board
• L293D H-Bridge
• SG90 Servo Motor
• DC Motor (3-6V)
• 7 Segment Display (Common Cathode)
• Ultrasonic Sensor
• Joystick
• Push Buttons (6 Pc)
• Rotary Encoder
• Relay (5V)
• DHT11 Temp./Hum. Sensor
• Potentiometer (10K) (2 Pcs)
• 3x4 Keypad
• Breadboard
• MM Wires (65 Pcs)
• FF Wires (20 Pcs)
• MF Wires (20 Pcs
• Green, Red, Blue LEDs (4 Pcs each
• RGB LED (Common Cathode)
• Resistors: 220 (20 Pcs), 10K (10 Pcs), 1K (10 Pcs)
• Resistor Card
• Screwdriver (3mm)

Open Starter Kit Documentation

Work in progress! Feel free to check out the files and give feedback.

The Steering Car PCB kit is a fun and rewarding build that will familiarize you with H-bridge motor control and Servos.

The car behaves like any other RC car, it makes agile turns and zips around at speeds much greater than that of our Mecanum Kit build. The PCB also has a voltage regulator built into it, giving you the option to power your project with a 9V battery.

Open Documentation