Filter
Real results. Real quick. Welcome to the new world of making!
Sold Out
Quantum Starter Bundle
Now electronics hobbyists have everything they need to make amazing projects - all in one box. The Quantum Starter Bundle has all the hardware and supporting software to start creating right away. In the box you’ll discover a Q-Server and two Builder Bases to connect to most off-the-shelf components. Within 10 minutes you can make your first fully functioning wireless project.
Show more
1 928 kr
Sold Out
Q-Server Central Core
The Quantum Q-Server provides complete control over your entire IoT platform. Anyone can now build a powerful wireless IoT network controlling any DIY electronics projects in minutes. The Q-Server, with its formidable built-in software, is the heart of the Quantum IoT platform. Experience real wireless integration and automation capabilities combined with a self-discovering network. Range extension coming soon.
Show more
1 392 kr
Sold Out
Q-Client Builder Base
The Q-Client Builder Base is the easiest way to build custom IoT devices. With supported and tested libraries, it eliminates the painful tasks of DIY electronics projects because you don’t have to write a single line of code. Have fun focussing and customizing your project instead of fixing issues. Newbies and Ninjas alike can now create smart IoT networks.
Show more
429 kr
Component Kit
What’s in the box? Everything to satisfy your inner electronics enthusiast urges and get you making your new project. This kit contains 26 carefully curated components to build a wide variety of projects as you improve your electronic making skills. The kit comes in a sturdy container which measures H2.25"H x 9.25"W x 6.25"D and includes the following:
- I2C LCD Display
- WS2812 RGB LEDs (8 Pcs)
- IR Emitter
- HC-SR501 PIR Sensor
- Stepper Motor + Driver Board
- L293D H-Bridge
- SG90 Servo Motor
- DC Motor (3-6V)
- 7 Segment Display (Common Cathode)
- Ultrasonic Sensor
- Joystick
- Push Buttons (6 Pc)
- Rotary Encoder
- Relay (5V)
- DHT11 Temp. / Hum. Sensor
- Potentiometer (10K) (2 Pcs)
- 3x4 Keypad
- Breadboard
- MM Wires (65 Pcs) / FF Wires (20 Pcs) / MF Wires (20 Pcs)
- Green, Red, Blue LEDs (4 Pcs each)
- RGB LED (Common Cathode)
- Resistors: 220 (20 Pcs), 10K (10 Pcs), 1K (10 Pcs)
- Screwdriver (3mm)
- Resistor Card
429 kr
Power Supply DIY Kit
Break free and use the Power Supply DIY Kit to make your project more portable. This DIY kit provides all the components required to create a power supply that accepts 7-12V and converts the voltage down to 3.3V or 5V to power your circuit without being tethered to a wall outlet. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Scan the QR code on the back of the packaging to get started.
Show more
107 kr
Simon Says DIY Kit
Get your mind working and put your electronic maker skills to the test. With this kit you can build the updated, 21st Century version of the classic Simon Says memory game. Created to utilize the MCP23017 port expander in conjunction with more complex game logic, this is a more advanced project to complete. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
161 kr
Joystick DIY Kit
Build this once and enjoy it forever. The Joystick Kit provides versatility and convenience as you grow your portfolio of electronic projects. No need to remake joystick controllers on a breadboard every time you need one, or build a controller for each project. Instead, build once, and then have a ready-to-go joystick controller to switch between projects anytime. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
161 kr
Four Motor DIY Kit
Designed to control up to four motors by utilizing a TLC5940 chip and two L293D H-Bridges. This compact DIY kit can amazingly be attached to control and run up to 4 motors at 5v. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
161 kr
Flat Power Supply DIY Kit
Like its successful predecessor, but with a lower profile to fit into smaller projects. This kit converts 7-12V into 3.3 or 5V to power your microcontroller, connected components, and circuits without being tethered to a wall outlet. Change the regulated voltage of the kit between 3.3V and 5V with a switch on the PCB to provide the correct voltage that your circuit requires. Includes multiple terminals to power circuits at the regulated voltage or at the input voltage. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Scan the QR code on the back of the packaging to get started.
Show more
161 kr
IR Remote DIY Kit
This kit includes a series of buttons and an IR emitter that can be used to create the ultimate universal remote. It allows you to control any hardware component connected to your controller and/or countless IR devices. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
161 kr
Outlet Switch DIY Kit
Want to control the power of an outlet? This kit allows you to control the power of an outlet from any smart device or with a trigger component like a pushbutton on the IR remote. It takes in up to 240V AC or 30V DC at 10 amps, and uses a relay switch to power the outlet on/off. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
215 kr
Motor and Servo Driver Board DIY Kit
The Motor Servo Driver DIY Kit gives you the power to control eight servos at 5V and four DC motors up to 25V at 3 amps. This kit brings versatility and permanence to your maker abilities. Build it once and use it to control a combination of servos and motors depending on what you need for your project. Contains PCB and necessary parts for assembly. Not included are soldering iron and solder. Requires a controller such as Arduino or Raspberry Pi. Scan the QR code on the back of the packaging to get started.
Show more
322 kr
